There are two common dangers in the operation of laser cutting machines. One is the radiation damage of the laser to the human body, and the other is the accidental injury to the operator during the cutting process. No matter which kind, there will be great losses to the victims and enterprises. There are two kinds of dangers common in the operation of laser cutting machines. One is the radiation damage of the laser to the human body, and the other is the machine in the process of cutting. Accidental injury to the operator. No matter which one, it will bring great losses to the victims and businesses. Therefore, companies should take appropriate measures to safely operate laser cutting equipment to minimize and avoid accidents and injuries. So, does the laser cutting machine manufacturer safely operate the fiber cutting machine? **
According to the level of the laser cutting machine device, the professional personnel should guide the processing; the laser production of the third level or higher must be performed by the person with proper safety education; the laser cutting device in the action, if the laser is not emitted, do not visit the optical path. Laser resonator adjustment: When the optical axis is lowered, the laser will be suddenly emitted, and attention should be paid to the protection of the eyes. When the CO2 laser uses a large laser that cannot be seen by the eyes, the nearby people should pay special attention; the reflected light cannot be avoided. Protective glasses can be used when shooting light or when using lasers of Class 3 or higher.
Metal laser cutting machine http://
CNC laser cutting machine http://
Http://news.chinawj.com.cn Submission:
Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Carbon Brush Assy Slip Ring, Carbon Brush Assy Spring,Carbon Brush Assy, Carbon Brush Holder Assy,Starters Carbon Brush Holder Assy
Haimen Hailing Carbon Industry Co., Ltd. , http://www.carbonbrush-hl.com