Latex paint is now more environmentally friendly water-based paint, is now the most popular home decoration in the wall decoration method, according to the level of latex paint material itself, there are corresponding high, medium and low latex paint construction process . The construction process of latex paint is good or bad, it is related to the future whether the wall is beautiful, whether the time will be long cracking, bubbles and other issues, then we will learn to understand together!
Latex paint construction process, step 1 , primary treatment
Closed parts of circuit pipelines, cement repair sites, cement plaster walls, etc. are scraped with gypsum powder. The emulsion paint on the board is first crack-proof and then sealed with alkyd varnish. The surface of the grass-roots level should be polished smooth, clean, no oil, dust or bumps.
Latex paint construction process, step 2 , full scrape putty
The first time the full use of rubber scraper full scraping, requiring horizontal scraping flat, uniform, smooth, dense flat, line angle and edge neat degree. Scratch as much as possible, not to miss the shave, the joints can not stay squatting, be careful not to stain the door and window frames and other parts, otherwise it should be cleaned in time. After the first time the putty is dried, it is smoothed with coarse sandpaper.
Pay attention to balance the operation, protect edges and corners, and clean it with a brown broom after grinding. The second pass of scraping is the same as the first pass, but the direction of scraping is perpendicular to the front putty. Then use coarse sandpaper to smooth the surface, otherwise it must be carried out for the third time and the fourth time. Use 300W solar light to illuminate the wall surface or ceiling surface with coarse sandpaper, and finally use smooth sandpaper to smooth and smooth.
Latex paint construction process, step 3, sealing primer
If you are using high-grade latex paint, you will need to seal it after filling the putty. It can be applied by roller or spray. Pay attention to the dry and clean wall surface. The coating should be uniform and cannot be missed.
Latex paint construction process, step 4, brush latex paint
Brush the first pass of latex paint, puttying and smoothing, and clean; brush the second pass of latex paint, local repair, a comprehensive inspection, polished flat, clean; brush the third pass of latex paint, latex paint construction process is completed.
Latex paint construction process, step 5 , polishing, cleaning
After the wall is dry, polish it with fine sandpaper. After the completion, remove the obstructers and sweep the splash materials. The construction of the latex paint is completed.
Regarding the construction process of latex paint , I will introduce it to you. I hope to help you, and I would like to look forward to seeing more information on this site.
Latex paint
PVC rubber strip all use 100% new YuanJiao as basic material, adding a certain butadiene acrylonitrile rubber powder and catalyst, make PVC modified and become good elasticity, tension, and greatly improve the service life of the PVC sealing rubber strip. Our factory to ensure that raw materials are the new materials production, ensure the production of sealing strip are not contain reworked material, a doll materials, such as wire skin of waste material Angle. Ensure product quality and safety.
PVC Spline,PVC Sealing Strip,PVC Spline For Door,PVC Spline For Window
Hebei Charlotte Enterprise Co., Ltd. , https://www.cnscreening.com