At present, the building materials market has a variety of building materials for floor decoration. In general, mainstream materials mainly include floors, floor tiles, and carpets. In terms of construction complexity and daily care, they have their own advantages and disadvantages. Choose the most suitable floor decoration materials for the home? This issue of Xiaobian will introduce to you in detail the advantages and disadvantages of the three categories of floor decoration materials.
|First, plan before material selection|
No matter what materials are used to decorate the ground, the ground leveling work must be done before construction. The so-called leveling of the ground means that when the decoration is finished, the ground is generally leveled by self-leveling cement, leveled by cement mortar, or leveled by plaster in order to achieve a little flatness on the floor. The effect on the effect of home floor decoration is Very obvious.
Ground leveling method recommendation - self-leveling leveling method
Since there are many methods for leveling, editors will not describe them one by one. Here we recommend the more mainstream self-leveling leveling methods. The leveling effect is also the best:
1, ground pretreatment: general rough ground will have a protruding place, need to be polished away.
2. Brush the interface agent: Apply two interface agents on the polished surface to make the self-leveling cement interface with the ground more closely.
3, inverted self-leveling cement: self-leveling cement and water ratio 1:2 to ensure that the cement can flow, but not too thin.
4. Use roller to evenly grind the cement: press the cement evenly with a roller with a surface to make the surface more smooth and solid.
After the above four steps, the ground leveling work is completed. It should be noted that special shoes should be put on during construction to prevent leaving marks on the cement. In addition, three days before self-leveling, it is necessary to do a good protection, that is, three days later. Only to start laying a variety of flooring.
The air, which is drawn in by the motor of a heat gun, is electrically heated. The desired temperature can be set to between 100 to 600 and can be maintained electronically, independent of the required are flow rate. Various possible applications include thawing, drying, tinning, sharping, setting and removal of old coats of paint and staring adhesive processes.
Hot Gun,Electric Hot Air Gun,Hot Air Gun,Hot Air Heat Gun
AWLOP CO.,LTD , https://www.awlop.com