In order to minimize the power consumption of the battery, 4S shop experts put forward two suggestions: First, avoid turning on the lights or listening to the radio for a long time in the case of engine stall; secondly, even if the engine is running, if the parking time is long, it should Turn off the power of unnecessary electrical equipment (inside and outside lights, audio, navigation, etc.). Develop a good car habit to avoid unnecessary dilemmas.
However, in the event of a sudden loss of power in the battery, there are several ways to "self-help."
First, the start of the cart is the most familiar and most effective emergency starting method, but this is a last resort and cannot be used frequently, because it has certain damage to the engine and the clutch. In particular, the automatic vehicle must avoid using this. The method starts.
Second, in order to avoid the battery can not be charged when the battery is not available, the owner should prepare a jumper cable in the car, which can be bought in the general auto parts store. However, when connecting jumper cables, you must not mistake the connection sequence of the jumper cables. First connect the positive terminal of the battery that is not powered to the positive terminal of the rescue vehicle battery, and then connect the negative terminal of the rescue vehicle battery to the metal part of the engine compartment of the vehicle (grounding wire). After the jumper cable is connected, the engine of the rescue vehicle can be started, and the engine speed can be slightly increased. After about 5 minutes, the battery can be charged urgently. After charging is complete, the jumper cable should be removed in the reverse order of connecting the jumper cables.
The most reliable way is to contact the rescue vehicle in time, then connect the jumper cable and temporarily charge the rescue vehicle to start the engine.
Finally, experts warn that the battery life is generally 2 to 3 years. After this period, the car mainly pays special attention to the maintenance of the battery, and if necessary, it is replaced in time to avoid danger.
Matrix Body PDC Bits
Great bits design and manufacture a wide variety of Matrix body PDC (polycrystalline diamond cutter) bits. Our PDC Bits are offered in a variety of sizes, blade count and cutter sizes.
PDC bits are designed for high speed drilling in shale, limestone, and sandstone formations. Unlike Roller Cone Bits , these PDC bits are a one piece matrix bodies with no moving parts. The fixed-cutters shave away the rock, making it possible to operate with higher rotation speeds more efficiently in consolidated formations.
Our Matrix body bits are manufactured by mold process. The tungsten carbide and binder materials are arranged into the mold. The mold get placed in to the furnace for certain period of the time and materials are cooked to certain temperature. The mold later cooled down and broken to remove the unfinished matrix bit.
Matrix Body PDC Bits
PDC Drilling Bits,Water Well Drill Bits,Matrix Diamond Drilling Bits,Matrix Body PDC Bits
CANGZHOU GREAT DRILL BITS CO., LTD , https://www.pdcbits.nl