water pipe oil pipe anti corrosion electrotatic spray powder coating
Details:
This is an epoxy-based smooth  satin coating with  a high level  of zinc,  providing excellent corrosion protection while  improving the adhesion properties  of powder topcoats  resulting in superior  service life and film integrity. It is not recommended for exterior use without a topcoat,typically used for garden tools,industrial waste equipment,agricultural  machinery, pipeline coatings, electrical  switch gear,cabinets and cable ducting.
Properties:
It is higher  average specific gravity than standard  powder coatings, therefore box feeders and
fluidizing hoppers will need to be tested to ensure adequate mixing. It may require increased air pressure
or vibration levels than standard powder coatings.
AVERAGE COVERAGE
8-12 square meters /Â kg, thickness 60 microns (100% of the powder coating utilization rate)
PACKING
Outside carton lined with two layers of polyethylene bags, each containing 20 kg or 25kg net weight.
Â
- RAL colors coating powder
- Pantone colors
- Color-matching regarding customer requirement is available
- Â
GENERAL TYPES
- Polyester /Hybrid powder coating
- Epoxy Powder coating color
- Metallic powder coating color
- Hammer tone color powder coating
- Texture color powder coating powder
Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-color.
Â
PHYSICAL PROPERTIES
- Specific gravity :1.2 ~Â 1.8g/cm3 up to colors
- Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)
- Level of liquidity:24 ~Â 27 mm
- Â
CURING CONDITIONS
180 °C ~ 200 °C (work piece temperature), 10-15 minutes
Â
STORAGE AND TRANSPORT
Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.
Â
HEALTH AND SAFETY
Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating
We offer free samples to you.
You can contact me informatoin as follows,
Attn:Danae
water pipe oil pipe anti corrosion electrotatic spray powder coating
Details:
This is an epoxy-based smooth  satin coating with  a high level  of zinc,  providing excellent corrosion protection while  improving the adhesion properties  of powder topcoats  resulting in superior  service life and film integrity. It is not recommended for exterior use without a topcoat,typically used for garden tools,industrial waste equipment,agricultural  machinery, pipeline coatings, electrical  switch gear,cabinets and cable ducting.
Properties:
It is higher  average specific gravity than standard  powder coatings, therefore box feeders and
fluidizing hoppers will need to be tested to ensure adequate mixing. It may require increased air pressure
or vibration levels than standard powder coatings.
AVERAGE COVERAGE
8-12 square meters /Â kg, thickness 60 microns (100% of the powder coating utilization rate)
PACKING
Outside carton lined with two layers of polyethylene bags, each containing 20 kg or 25kg net weight.
Â
- RAL colors coating powder
- Pantone colors
- Color-matching regarding customer requirement is available
- Â
GENERAL TYPES
- Polyester /Hybrid powder coating
- Epoxy Powder coating color
- Metallic powder coating color
- Hammer tone color powder coating
- Texture color powder coating powder
Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-color.
Â
PHYSICAL PROPERTIES
- Specific gravity :1.2 ~Â 1.8g/cm3 up to colors
- Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)
- Level of liquidity:24 ~Â 27 mm
- Â
CURING CONDITIONS
180 °C ~ 200 °C (work piece temperature), 10-15 minutes
Â
STORAGE AND TRANSPORT
Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.
Â
HEALTH AND SAFETY
Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating
We offer free samples to you.
You can contact me informatoin as follows,
Attn:Danae
Schindler Elevator Spare Parts
Schindler Elevator Spare Parts, Schindler Elevator Parts
Schindler was founded in 1874 in Lucerne, Switzerland, and is one of the world`s leading providers of elevators, escalators, and moving walks, as well as maintenance and modernization services. The Group has over 1 000 branch offices in more than 100 countries, as well as production sites and research and development facilities in the US, Brazil, Europe, China, and India.
Schindler manufactures, installs, services and modernizes elevators, escalators and moving walks for almost every type of building requirement worldwide. The company specializes in the latest-technology engineering, as well as mechanical and microprocessor technology products designed and rigorously tested for safety, comfort, efficiency and reliability.
Inspired by the vision of being the best service provider in the industry for its customers, Schindler will continue in the future to develop highly innovative and user-friendly mobility solutions and to deliver these to the world market.
Schindler products can be found in many well-known buildings throughout the globe, including office buildings, airports, shopping centers/retail establishments and specialty buildings.
Schindler 3300
Capacity: 400 kg - 1'125 kg, 5 - 15 passengers
Travel height: up to 60m and 20 floors
Speed: 1.0 m/s and 1.6 m/s
Schindler 5500
Capacity: 630 kg - 2'500 kg, 8 - 33 passengers
Travel height: up to 150 m and 50 floors
Speed: 1.0 m/s up to 3.0 m/s MMR and MRL
Schindler 7000
Global high-rise solution for your landmark building
Single- and double-deck elevators
Capacity: 4'000 kg (single-deck) or 2x 2'250 kg (double-deck)
Travel height: up to 500m
Speed: 10 m/s
Schindler Elevator Spare Parts, Schindler Elevator Parts
CEP Elevator Products ( China ) Co., Ltd. , https://www.zjfullelevatorreplacement.com