Floor tiles are the most contacted home furnishing materials in the home. No matter how good the floor tiles are, it will inevitably cause scratches. It will also have a certain impact on visual effects. Do you know that floor tiles can be repaired with scratches? Well today Xiao Bian wants to share for everyone how the tiles are scratched and how they are maintained.
How to repair the floor tiles with scratches
1. How to fix scratches on the floor tiles ? You can choose the floor tile repair agent to repair the scratches of the tiles. First apply a small amount of repair agent with a brush to apply the cracks on the scratches of the floor tiles. Apply it once every other hour and wait until After the repair agent has dried, apply it again until there is a reflective effect on the scratches on the floor tiles. After the restoration, you can leave the scratches on the floor tiles to maintain a long-term cleanliness. If there is a deep scratch on the brick surface, You can use a water mill to grind the surface, and be careful when grinding or throwing to avoid uneven or brick damage.
2. How do you fix scratches on the floor tiles ? Everyone knows that when decorating, you have to push or pull the iron frame or aluminum alloy on the floor tiles. What happened to the tiles on the floor tiles? To remove metal scratches on the floor easily and quickly , You can use a detergent to soak for about 3 minutes before scrubbing. The floor tile cleaner and metal scratches will become loose after being decomposed. At this time, you can use a wet towel to dip a little detergent to wipe clean, and It will not cause any effect on the surface of the floor tile, and will not change any surface gloss of the floor tile.
How to maintain the tiles
1. Use the corner guard
The tile corner strip is a line that protects the corners of the tiles. It is inserted directly into the wall during construction. The side that is fan-shaped encloses the tile corners. In addition to the protective corners, the corner strips can also beautify and hide. Tile defects, such as irregular cross-section tiles, can be perfectly seamed at the corner seams, and the corner strips can be concealed.
2. Sealant
Most of the stains on the tiles are due to the moldy gaps between the tiles or the accumulation of debris. In fact, it is only necessary to use caulking agent in tile construction to avoid this problem.
3. Waxing
After laying the tiles, it is best to apply a layer of wax to improve the waterproof and antifouling properties of the tiles. After a quarter of polishing and waxing, you can make the tiles in your home lastingly beautiful and increase the service life.
4. Anti-oil stickers
It is best to paste anti-oil stickers on the tiles around the kitchen hood and in the cooking area, because the kitchen is more likely to splash oil, accumulate grease, and cause damage to the quality of the tiles.
Xiao Bian summary: The above is the small floor for everyone to share how the tiles are scratched how to repair and how to maintain the tiles, tiles, if there are scratches will be stacked stains, the sooner the accumulation of stains to repair the easier to clean, I hope the above can be shared Help to you, if you need more information, please continue to pay attention to this site.
Plywood is the basic wooden product for furniture, is one of the biggest wooden products, is used for plane, boat, train, bus, construction and package etc. It is the one of the main way to save wood resource and improve the usage of wood.Usually poplar, pine, combi, hardwood as the core, the bace&back are the Veneer surface, such as Okoume, Bintangor, Pine, Birch, Poplar, Pencil cedar, Maple, Cherry, White Oak, Sapele, Beech, Red Oak, Ash etc.
LULI Group Corp. Ltd, well known as the leading manufacturer for wooden, steel and paper products, located in Shouguang, Weifang, Shandong, China. Since the foundation in 1985, it focus on the production of plywood, venner, MDF, Particle Board, Door skin, Blockboard, Finger joint board, OSB, paper, Steel etc. And we have High Quality Plywood.
Advantages:
1.High bending strength
2.Strong nail holding
3.Moisture-proof and easy work
4.Tight construction and high strength
5.No ratten or decay
6.Low formaldehyde emission
7.The productions are suitable for the construction of viaduct and tall frame building
8.If put in boiling water for 48 hours,it still glue sticking and still formed
9.If used abide by illustration strictly,it can be reuse more than 50 times
10.Solve the problem of leaking and rough surface during construction process.Particular suiltable for watering concreat.
The details of Plywood:
size:1220*2440mm 1220*3000mm 915*1830mm 1250*2500mm, according requirement
thickness:2mm-60mm
core:poplar/combine/hardwood
glue:MR/E2/E1/E0/melamine/WBP
kinds:okoume,bintangor,pine,birch,poplar,cedar,ect.
certification:CARB,FSC,CE,JAS,ISO9001,ISO14001
Plywood
Commercial Plywood,Plywood Sheet,18mm Plywood,Plywood Prices
Luli Group Co.,Ltd. , https://www.plywoods.nl