Home>Bearing knowledge> Bearings can not ignore the oscillation |
Can not ignore the oscillation in the bearing
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
Excitation due to the change in the number of loaded tumblers When a radial load is applied to a bearing; the number of tumblers carrying the load is slightly changed during operation; ie: 2-3-2-3. . . . This causes a shift in the direction of the load. The resulting oscillations are unavoidable; however, they can be relieved by axial preloading; they are applied to all rolling bodies (not for cylindrical roller bearings).
The waviness of the component is in close cooperation between the bearing ring and the bearing seat or the drive shaft; the bearing ring can be deformed in cooperation with the shape of the adjacent component. If it is deformed, it can oscillate during operation; thus; It is important to machine the bearing housing and drive shaft to the required public service.
Partial damage due to handling or device failure; a small number of bearing raceways and roll bodies can be damaged. During operation; a specific oscillation frequency occurs when rolling over damaged bearing components. Oscillating frequency analysis can identify damaged bearings component.
The oscillating action in the use case is used in many applications; the stiffness of the bearing is the same as the stiffness of the surrounding layout. Because of this feature; only the correct selection of the bearing (including preload and clearance) and its equipment in use; Reduce the oscillations in use.
There are three ways to reduce the oscillation:
C removes the critical encouragement oscillation from use,
C suppresses the critical excitation oscillation between the agitating component and the resonant component,
C Change the stiffness of the layout; then change the critical frequency.
Recommend to friends comments close window
Bearing related knowledge |
Bearing ABEC parameters Raiders FAG high-speed bearing smoothing skills analysis progress ball bearing vibration and noise reduction skills and the use of process equipment bearings - printing machinery on the bearing needs bearing knowledge Daquan (six) |
This article links to http://
Please indicate the bearing network http://
Previous:Lubricating strength limit Next: Foreign mechanical occupation bearing heat disposal method
PVC Hollow Wall Sheet is a stronger version of PVC Roof Sheet. It has more solid structure and excellent features of heat insulation. It is suitable for tropics very much.
Excellent corrosion resistance: PVC Wall Sheet has very good corrosion resistance, which will not be degraded by acid and alkali corrosion. It is very suitable for chemical plants, coastal areas with strong salt fog corrosion and areas with serious air pollution.
Good insulation performance: PVC Wall Sheet has insulation performance, is non-conductive, and improves the safety factor of buildings and residents.
PVC Hollow Wall Sheet
White Pvc Panels,Hollow Plastic Sheet,Plastic Hollow Sheet,Pvc Cladding Sheets
PINGYUN INTERNATIONAL , https://www.pingyunconstruction.com