Home>Bearing knowledge>Sliding bearing requirements for smooth grease |
Sliding bearings for smooth grease
Source: China Bearing Network Time: 2014-03-08
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
2. The dropping point should generally be higher than the working temperature by 20 ~ 30 ° C; to prevent the smooth grease from changing due to the temperature effect during the operation. æ– å—”é‡Ð®æœ” å—”é‡Ð®æœ” 一起 一起 一起 一起 一起 一起 一起 一起 一起 轴承 轴承 轴承 轴承 轴承 轴承 轴承 轴承 轴承 轴承 轴承 轴承 轴承 轴承 轴承 轴承 轴承 轴承 轴承 轴承The weight of the application of the temperature promised.
3. The working environment of the bearing should be watery and moist. The calcium-based grease, calcium-sodium base grease or high-temperature constituent grease with water resistance should be used. If it is used in high temperature and steam environment, compound lithium should be used (or Aluminium) base grease, when the environment or temperature difference scale changes greatly; then the temperature should be used to a wide range of silicate grease.
4. For bearings with extra large loads, use smooth grease with extreme pressure additives. If the service life is long, use a smooth grease with anti-oxidation additives. If the demand is very strict, the atmosphere around the bearing is very tight. Smooth fat.
Adhesion function: must have a good adhesion function.
Recommend to friends comments close window
Bearing related knowledge |
"Rolling bearing" features detailed analysis of the newspaper printer roller bearing fault diagnosis oil film NSK bearing oil smooth handling characterizing the physical quantity of bearing oscillation? Analysis and Disposal of Bearing Faults in Cement Machinery (3) |
This article links to http://
Please indicate the bearing network http://
Previous: Minimum load of rolling bearing Next: Seal and smoothness of SKF THD take-up housing
Guangzhou Quanxu Technology Co Ltd , https://www.skychema.com