The lighting of the kitchen needs to be divided into two levels: one is the lighting of the entire kitchen, and the other is the lighting of washing, preparation, and operation.
In general, the open kitchen cabinets, whether shaped, L-shaped or U-shaped cabinets, the use of light sources in the form of ceiling-embedded spotlights, the number of 6 to 10 ranging. Try not to use a ceiling light because it does not collect light and only has astigmatism, so it should not be installed in the kitchen. The light source chooses warm light as much as possible, so the light is very beautiful.
The lightness of the kitchen should be moderate, and it is better to use fluorescent lamps that can maintain the original color of vegetables and fruits. This not only enables the dishes to exert their appetite for color, but also helps the housewife to have a higher discrimination when washing.
Lamps are functionally based, generous, and easy to clean. Luminaire materials should not be rusted or have a good surface protective layer.
The direction of the light should be projected from the front as far as possible so as not to cause shadows to hinder the work, especially when selecting the spotlight as a lighting fixture. It's best to put a light above the kitchen sink or the chopping case, otherwise things will be backlit at night, and poor vision is even worse at night. In some glass storage cabinets can be installed projection lamps, especially when the interior storage of some colored tableware, can achieve a good decorative effect.
In terms of environment, don't use dark colors in kitchen ceilings. Don't use dim lights. Dark background with matte lights, kitchen lighting will be similar to the virtual.
All in all, the kitchen is a place to cook, try not to dress it up too fancy, it is better to choose the own cabinet with light. Considering energy conservation, do not install too many lights and install smart switches.
NVC lighting brand lighting glass switch decoration open kitchen kitchen cabinet door kitchen glass sliding door
NPT hose end Fitting Threads: NPT threads fittings are your traditional tapered thread fittings and have been used for 100 years. They are available in low-pressure black iron and brass, and high-pressure steel and stainless. This connection style is used in pneumatic and process systems, and lower-pressure hydraulic systems. ORFS tube fittings system consists of ORFS Male fitting with O Ring in Face, which seals against Flat Seated ORFS Female Swivel Nut fitting.
American Hydraulic Fitting inculde:
NPT Hose Fittings
JIC 37° Fitting: The Joint Industrial Conference (JIC) fitting is the most common hydraulic connection style. It consists of parallel threads and a 37° cone on the fitting end that attaches to either a flared tube or hose fitting.
American Hydraulic Fitting
American Hydraulic Fitting,SAE Hydraulic Fittings,SAE Flange,Hydraulic Hoses And Fittings
SHIJIAZHUANG TOPA TRADING CO., LTD. , http://www.topahydraulic.com