The spiral groove machining of the milling cutter reamer is generally carried out by using a slot milling machine or a conventional milling machine with a 60° half-tip tip and a top end of the plum blossom to withstand the workpiece. However, the milling and reamer which have a relatively large length and long diameter are difficult to process due to the large slenderness ratio, and the workpiece is easily bent and deformed. For example, a straight shank end mill with an outer diameter of φ8 mm and a length of 100 mm is used, and the reject rate is 30%. So we improved the fixture to achieve a pass rate of 100%.
Recent Posts
- 2 Point Safety Seat Belt for Bus
- Rubber Hydraulic Hose (DIN EN853 2SN / SAE 100R2…
- Recycled Rubber Gym Tile Flooring
- Factory Supply Professional Automobile Part
- Customized Micro Hole Lamination Aluminum Honeyc…
- Nice Surface Treatment of Aluminum Tube for Indu…
- Galvanized Ornamental Commerical Aluminum Fences
- Rubber Gym Flooring / Gym Rubber Floor Rolls
- Zinc Alloy Door Hardware Mounted Stopper with Ru…
- High Security Double Pins Computer Key Cylinder …
- En 1303 High Security Mortise Euro Profile Stand…
- High Security Single Opening Brass Lock Cylinder…
- Welding inspection
- High Quantity FRP Pultruded Rod Tube
- GRP FRP Fiberglass Pultrusion Tube (Rectangular …
- China Customized High Quality Tungsten Carbide C…
- Effect of refractory filler on the quality of fo…
- 150L Hcfc-227ea Fire Suppression System Cylinder
- Welding of steel beam of overpass bridge in Wuha…
- Casting intrinsic quality