What is the number of batteries used in electronic anti-theft locks? What should I do if the electronic lock is turned off? Electronic locks, as a new type of security locks, are more and more playing a role in security protection. Electronic locks have obvious advantages over traditional mechanical locks. The so-called electronic locks are controlled by a circuit to control the status of locks, which is convenient and efficient. Because of its security features, it has been used in many scenarios and gradually replaced mechanical locks. This article answers questions about power consumption.
Electronic anti-theft door locks use a few batteries
In general, the battery specifications of the electronic lock are the same. Under normal circumstances, electronic door locks are mostly powered by 4 or 8 AA batteries. Most batteries use alkaline batteries because they have a long life, are safe to use, and do not leak easily.
Some brands of electronic door locks using rechargeable batteries, can eliminate the need to replace the battery, easy to use for a long time, the use of battery-powered electronic lock design is not too much.
The mainstream electronic lock adopts the No. 5 battery as the power supply solution. The detailed design is different. The product model specification shall prevail.
Electronic lock security door how to do power offThe electronic lock anti-theft door lock is relatively common and the power is exhausted. The battery is exhausted. The battery box problem and power outage affect the normal use of the electronic security door.
What to do if the electronic lock is powered off? In most cases, the domestic electronic lock requires an emergency key, which can be manually unlocked by using a spare mechanical key. Some of the non-hole locks do not have an emergency key hole. The battery needs to be replaced when the low-battery alarm occurs, or the emergency charging is performed through the temporary charging hole. You can temporarily supply power through the charging treasure, pay attention to open the back cover and replace the battery in time after opening the door.
1, the battery is exhausted, most of the electronic lock using alkaline dry battery power supply, battery life is limited, after the battery is exhausted, the need to replace the battery in time, it is generally recommended to replace the battery alarm, pay attention to disposal of waste batteries, do not affect the environment.
2, battery box problem, the battery box contacts corrosion, can not continue to supply power will also affect the use of unlock, electronic door lock installation environment needs to maintain dry and ventilated, wet environment is more easily corroded, affect the use of the battery, you can wipe rust through sandpaper, replace Battery,
3, power outage status, generally affect the electronic access control system, some companies need power access control access, so the power outage affect the normal unlock, most of the electronic lock access control with emergency power supply, no need to worry about power failure, if the emergency power supply can not work properly , need to be replaced in time, can be temporarily unlocked by a mechanical key.
According to relevant department regulations, domestic electronic locks need to be equipped with emergency keys, so even if the electronic door locks cannot be used due to power supply, they can also solve the problem through emergency keys.
The above is a smart lock China Network Xiaobian finishing publishing the electronic lock security door power supply use of the introduction of science, more electronic lock knowledge, please pay attention to the site related columns!
Casing Pipe,Steel Casing Pipe,Welded Steel Pipes,Astm Casing Pipe
Torich International Co.,Ltd--The Steel Tube Maker , http://www.chinasteeltubepipe.com