[ALUMINIUM NETWORK] As aluminum has become the preferred material for automotive manufacturing, global leaders dedicated to the development and application of advanced materials are helping cast aluminum plants to increase production and reduce scrap rates by avoiding metal contamination from melting and heat preservation processes. .
Morgan Advanced Materials Corporation attaches great importance to the consequences of aluminum pollution, so the company continues to vigorously develop two specialized coatings for the diffusion barrier in the melting process. Although aluminum is often alloyed with other metals or elements to provide accurate mechanical and chemical properties for various applications, its chemical reaction with niobium creates pollution and impurities and affects the overall microstructure of the material after melting.
Mirco Pavoni, Global Technical Director of Molten Metal Systems for Advanced Materials at Morgan, explained: “The impurities and intermetallic compounds generated in the melting process of aluminum can reduce the overall ductility of aluminum materials and cause dislocations. The quality of castings is often significantly affected by metallic impurities. The impact has led to an increase in the scrap rate. As the auto industry has increased its use of aluminum and aims to reduce emissions by reducing weight, it is crucial to produce as pure materials as possible. The cost pressures are also increasing, which means that higher casting quality, lower scrap rate, and better crucible life time have a huge impact on costs.
To this end, Morgan developed PRO and STAR coatings that have been proven to be particularly effective in reducing aluminum alloy impurities, preventing material contamination, and slag in the crucible. These specialty formulas can be used on the inside surface of the crucible to prevent chemical reactions between the metal and the crucible and act as a barrier to reduce impurities. The application of the PRO coating is relatively simple and can be mixed with water and then applied by a trained hand worker to the crucible with a brush. It can also be used as a mortar to repair damaged or defective areas and extend the life of the crucible to a greater extent.
The STAR coating is more advanced and can provide better results for clay-bonded and carbon-bonded crucibles. It must be operated by a skilled supervisor, using a specific spray gun to form a nanoparticle layer within the crucible, and then sintering under specific conditions to ensure its firm bonding. This reduces the cleaning time while producing better metal purity than standard cesium.
Mirco also added: "PRO and STAR coatings are our expertise in materials science, applied engineering technology, and our long-term focus on end-user demand. Therefore, we can provide customers with better products. We also provide Internal R&D capabilities have been enhanced to serve the increasingly widespread mass market for aluminum applications such as automotive and aerospace industries.
Exterior Cladding Tiles are available in 100x297mm, 200x400mm, 300x600mm, 400x800mm, 600x900mm, 800x800mm...
There are many types of Exterior Cladding Materials , including imitation granite tiles, imitation marble tiles, sandstone tiles, etc. suitable for different places.
Advantage of Exterior Wall Cladding Tiles
1. The surface of the Porcelain Tile Exterior Cladding has a luster, flat or rough surface, and can present a variety of textures. The design is rich and varied, and has a strong decorative effect.
2. The Exterior Wall Cladding Materials has superior physical properties, sturdy and durable, good weather resistance, scrub resistance, etc., and has a long service life.
3. With easy to clean, fire, water, wear, corrosion and low maintenance costs.
4. Thin porcelain tiles on the outer wall, [light, large and thin", which greatly reduced the building load.
Exterior Cladding Materials For Buildings construction: adhesive construction, dry-hanging construction
Construction Notes
1. When the structure is constructed, the verticality and flatness of the outer wall should meet the standard requirements. The dust, dirt and grease on the surface of the base are removed.
2. On the base plastering surface, first hang the vertical and horizontal control lines, and then hang out the tile control line according to the size and arrangement of the tiles.
3. When the tile is pasted, the mortar should be full. It is not advisable to knock and move more. Especially after the mortar is collected, it cannot be corrected.
4. After the caulking is completed according to the design requirements, clean the surface with a clean cloth.
5. About 30 hours after the completion of the caulking (depending on the weather at the time), and after the brick joint has solidified to a certain strength, rinse the brick surface thoroughly from top to bottom with clean water.
Exterior Cladding Tiles
Exterior Cladding Tiles,Exterior Cladding Materials,Exterior Wall Cladding Materials,Porcelain Tile Exterior Cladding,Exterior Wall Cladding Tiles,Exterior Cladding Materials For Buildings
UMS New Materials Industry Co.,LTD , https://www.ums-factory.com