How to set the fingerprint lock? Fingerprint lock how to operate? How to use fingerprint lock? For consumers, buying a fingerprint lock is only the first step. The next step is to install it. Once it is installed, it can be used. However, the fingerprint lock is different from traditional mechanical locks, and it is different from the normal lock key lock method. Need fingerprints or passwords, therefore, the operation needs to understand some basic knowledge, take a look at the relevant introduction of this article.
Fingerprint door lock use operation setting detailed steps
1, the correct way to open the door
If there is no window opening password, press â€œ3â€ button, the green light will be on and the â€œbuzzâ€ sound will be heard. The fingerprint collection window will open automatically. If the window opening password is set, enter the correct password directly and the green light will be on and you will hear â€œclickâ€. After that, the fingerprint acquisition window opens automatically. Put your finger on the fingerprint collector. If the comparison is correct, the green light will be on and you will hear a "click". At this time, rotate the handle to open the door.
2, enter the fingerprint
Press the "ENT" key on the rear panel and enter the manager's fingerprint to enter the management menu. Select the "Enter user" submenu under the "User Management" menu. On the submenu, select "Entry Manager" or "Enroll User". Official registrants must select "entry manager."
Press the screen prompts, the new user needs to gently press the finger on the fingerprint collector, the acquisition light of the collector flashes, and the fingerprint is collected for the first time. When the acquisition lamp of the collection instrument stops flashing, the new user must temporarily move his/her finger off the surface of the collector. According to the display screen prompt, the new user needs to press the same finger on the fingerprint collector again. After setting it down, press the â€œENTâ€ key, and the collector light will flash again to start the second fingerprint acquisition.
After logging in, the display prompts the user to "Login Successful" or "Login Failed."
New users can go directly to the "User Management" menu, register the manager's fingerprint (up to 5 can be registered), or register the user's fingerprint (up to 95 can be registered). Once the manager enters, only the administrator can enter the system. Set up the function interface. When the administrator selects the "entry user" fingerprint, the ID number should be entered as prompted.
For your convenience in the future, please register the number and personnel information on the enclosed â€œUser Login Detailsâ€. After confirming the ID number, enter the fingerprint as prompted.
3, delete the fingerprint
Fingerprint deletion There are three methods: First enter the fingerprint lock management system menu, select the user management:
1 Select â€œDelete Userâ€ - â€œDelete Fingerprintâ€, put the finger of the fingerprint that has been entered and deleted, and press â€œENTâ€ to delete the fingerprint.
2 Select â€œuser ID queryâ€ function, press â€œâ†‘â€, â€œâ†“â€ key to find the ID number to be deleted, press â€œâ†â€ key to enter the delete function window, press â€œENTâ€ key to confirm deletion, press â€œESCâ€ key to cancel operating.
3 Select "Delete User" - "Delete All IDs" function, press "ENT" key to delete all users' fingerprints, empty the fingerprint database.
4, set the lock mode
The door lock mode can be divided into "manual" and "automatic", users can choose according to their needs. The default value of the lock time of the automatic lock door is to lock the door immediately after opening the door for 15 seconds. Manually locking the door is controlled by a manual lock button.
First press the ENT key and put the finger of the manager's finger print, enter the management menu after confirming the identity, and then select â€œSystem Settingsâ€, â€œLock the door modeâ€, and press the ENT button to confirm that there are two options, automatic and manual. "," "â†“" key to select, select and press ENT key to confirm.
5, emergency lock
Use a sharp, sturdy tool to remove the baffle from the emergency lock and you will see the key hole. Insert and rotate the key to unlock the lock. The use of fingerprint locks is relatively easy to grasp. However, some settings still need attention. Pay more attention to user settings.
Of course, the operation method of each brand will be different. Look at the specification specifically.
The above is the specific introduction of the use of fingerprint lock, I believe that all users and friends will be able to get started quickly.
JIANFA SANITARY WARE INDUSTRY CO., LTD , https://www.jfsanitary.com