Convenience stores can provide maximum convenience to everyone, so convenience stores should also consider this aspect of the decoration design, so how can the convenience store be decorated in order to be good? The following decoration home decoration network Xiaobian will bring you convenience store decoration design, I hope to help everyone.
How to decorate a convenience store?
Convenience store decoration design:
1. The design should conform to the customer's desire to purchase. The interior layout of the convenience store should be specifically divided according to the room type of the convenience store. Due to the different types and styles of the convenience store shelves, it is necessary to make overall considerations in the design of the convenience store space. In line with the customer's desire to purchase, the items that customers often purchase should be placed close to the shelves near the main entrance of the convenience store, which can stimulate customers to enter the store.
2. The interior design of the convenience store should balance the beauty and safety. The interior design of the convenience store should be evenly symmetrical, showing the unique style of the convenience store itself, and also pay attention to the safety of the customer. For example, do not set the steps in the store, which is easy to cause. The situation where the customer slipped occurred.
3. Convenience store interior design should adopt linear design. Any twisting and moving line movement method will cause confusion to customers. Therefore, the convenience store interior design should adopt linear design. In the case of having to use dynamic line design, the corner should be Set a sign indicating the category of the next shelf item.
Convenience store decoration design points:
1. Lighting: The lighting should use pure white double-tube fluorescent lamps, because the illumination of fluorescent lamps is the most balanced, and the double-tube fluorescent lamps can also compensate for the direct dead angle of single-tube fluorescent lamps, and the pure white light can reflect the products without reservation. Original color. The fluorescent lamp should be installed above the shopping channel. The height of the shelf is about half of the width of the shopping channel. The arrangement of the lamps should be consistent with the arrangement of the shelves to ensure direct illumination from the front.
2. Checkout counter setting: The checkout counter of the convenience store is located at the entrance and exit, and the checkout counter is divided into entrance and exit passages at the entrance and exit. The checkout channel (export channel) can be set to one or two according to the size of the store, and then 1 to 4 cash registers are allocated according to the forecast of the business scale (but the cash register network should have 8). If the conditions permit, you can also set up a â€œno shopping channelâ€ as a special channel for customers without shopping, so as to avoid congestion at the entrance and exit.
The width of the checkout channel is generally designed to be 1~1.2 meters, which is the best size that two customers can pass normally; the length is generally 6 meters, that is, the cashier is about 2 meters away, the checkout counter and the nearest The distance between the shelves should be at least 4 meters to ensure that there is enough space for the waiting customers to line up.
3, stacking settings: the space between the checkout counter and the shelf, and the middle of the store entrance channel is generally designed as a pile head, used as a new category, inventory goods, promotion period goods, iconic goods, brand goods and other key categories Sales promotion area. Due to the special position of the stack head position, the length and width of the stack head position are not more than 1 meter and the height is not more than 1.2 meters, so as to avoid blocking of the customer's line of sight and blockage of the passage. The pile head is located in the exit channel of the store, which is the longest place for the shop to stay. It is the best area for promoting goods. The supplier is also willing to pay time-based rent for product promotion. Therefore, the stacking fee can increase the convenience store. Pure profit.
4, shopping channel settings: convenience store channel design should be as straight and long as possible, to minimize corners and partitions, and the use of merchandise display, so that customers are not easy to produce fatigue and boredom, subconsciously extend the stay in the store.
5, non-commodity regional settings: In addition to sales stores, convenience stores also need some non-commodity areas, such as the office (master control room), staff lounge (dressing room), bathroom and so on. The convenience store's office is often referred to as the main control room. It has two main functions: one is the main room of the store POS system and the monitoring system, and the other is the command platform for the store supervisor to manage the store. Therefore, the office design is generally 0.8-1 meters above the plane, and the side of the store is a glass see-through window, so that the store supervisor can monitor and direct the affairs happening in the store at any time.
The above is how the convenience store that Xiaobian brings to you is good for decoration business? The entire contents of the convenience store decoration design plan, I believe that everyone has a basic understanding of convenience store decoration after reading this article, if you want to know more about decoration consultation, please click to enter the decoration knowledge channel.
More related wonderful reading:
How to decorate the barber shop? What should I pay attention to in the barber shop renovation?
How to decorate antique shops? Antique shop decoration design elements
How to decorate the toy store? Toy shop decoration design points
How to design a bakery? Bakery decoration design principles
How do flower shops decorate more? Master 3 flower shop decoration tips
General Purpose Powder-Actuated System is used for building fastening, which have three parts: Actuated tools, Cartridges and fasteners. When Actuated tool strikes cartridge and cartridge will explode in the inner of tools and produce a lot of high temperature and high pressure gas. The gas will push the piston and the piston will push the fasteners into the basement. Or the gas will push the fasteners directly into the basement. Like this, we can fix a lot of things into concrete and steel basement tightly.
The fundamental is as the following:
The Actuated tools are classified for direct tools and undirect tools, we can also called high velocity and Low velocity tool, the fundamental is as the following:
High velocity tool:
Low velocity tool:
Based on different purpose, Cartridges are classified for different calibers and dimensions. The usual caliber and dimension is as the following:
At the same time, each caliber cartridge is classified for different specification based on the quantity of inner powder, which is marked by different color. when the color is more darker, the power level is stronger. otherwise, the power lever is lighter.
The fasteners are classified for different categories. Each different category is classified for different specification based on different length and diameter. At the same time, it is can also be re-designed based on special use.
The packages are as the following:
1. Tools: one tool/ plastic box/carton or five boxes/carton
2.Cartridge: 100pcs/paper or plastic box, 100boxes/carton.
3. Fasteners: 100pcs/paper box, XX boxes/carton.
For shipment, all cartons will packed by pallet.
General Purpose Powder-Actuated Systems,Powder-Actuated Systems,Powder Actuated Fasteners,Powder Actu
YIBIN CITY NANXI DISTRICT QIANGXIN PLASTIC CO.,LTD. , https://www.homsetfastening.com