The materials used are manufactured by Shanghai Iron and Steel Technology Research Institute. The welded frame is firm and reliable. The steel products produced by the institute are leading domestically in terms of strength and toughness. Satisfy our design needs.
For high-loaded stents, we use high-strength manganese-based rectangular tubes that achieve the required strength and stiffness and are lightweight.
2, for all rotating hinges, all with a sliding bearing, and can be lubricated to improve the bearing life, flexible rotation, friction is small, smooth during the movement.
3, for all shaft parts, heat treatment, so that the shaft increases strength, improve wear resistance, so that equipment life extension, use more stable.
4. The hydraulic system adopts imported Italian pumping station. Through the design of the special valve, all the control valves in the system are placed in the connecting flange, which not only makes the structure more compact, but also fundamentally solves the traditional External superposition valve block hydraulic station is bulky and prone to leakage. Through the use of pilot-operated check valve, sequence valve and throttle valve and selection, the system is more simple, safe and reliable, and the operation is also more simple. (The whole system only needs one control button to complete all the lifting and lowering operations. Parts can be greatly simplified, and failures that may be caused by the circuit can be minimized. The hydraulic station uses a hydraulic pump with a pressure compensation design. Its maximum pressure can reach 30Mpa, and the pump life can be continuously started not less than 500,000 times. At the same time, the noise of the hydraulic station can also be reduced to the minimum decibel (no more than 55dB from 1m). ). The pumping station has a lifting mechanism locking device that allows the device to stay anywhere.
5, the hydraulic cylinder seals imported from Germany imported seals, long service life, no oil leakage.
6, the electrical system uses Schneider imported electrical appliances, and equipped with voltage and current relays, can ensure that in the case of over-voltage, over-current, to avoid damage to the electronic vitality components, and with an emergency stop button, in an unexpected situation can be cut off in time .
7. The equipment's retractable pedal adopts manual pull type. We install nylon strips on the contact surface to make the pedal move light, flexible, no shaking and no noise. And to ensure self-locking in any position.
8. The mobile wheel of the device is mounted on the upper frame, which reduces the height of the device and makes it more convenient to use.
9. The escalator of the equipment adopts a telescopic type to reduce the equipment volume and increase its safety and aesthetics.
10. When designing products, we intentionally add overload protection devices to make their performance more secure and reliable and prevent equipment from being damaged under overload conditions.
Niobium Tube as know as Niobium Pipe, its purity more than 99.95%, we can produce it as standard ASTM B 394. It has excellent superconducting properties.
We can produce the size as client's requirement.
The Niobium tube Application
1. It's widely used for steel, ceramics, electronics, nuclear energy industries and superconductor technology.
2. Medical, aviation, ornament, spectacle frame, filter net, metallurgy
3. Used in aerospace, chemical industry, electronics, electric light, rare earth, metallurgy and mechanical manufacturing
4. Used for high temperature furnace components, crucible, missile rockets nozzle high temperature furnace, etc
Niobium Tube
Niobium Tube,Niobium Pipe,Polished Pure Niobium Tube,High Purity Niobium Tube
Baoji Shengyuan Metal Material Co., Ltd. , https://www.baojisymetal.com